 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Fiber Optic MT and MTP / MPO Cable Assemblies Features & Benefits * Provides connectorized * * * * * * interface for ribbon or ribbonized fiber Connector alignment is made with precision alignment pins Fanouts to simplex fiber connectors available Low loss interconnect Push-pull mating of MTP* for quick connections NTT compatible Consistent and repeatable performance Applications * High density interconnects for: - Telephony central office and local loop - Data communications Provides interconnect for parallel optical transmitters and receivers * Molex MT and MTP connectorized ribbon fiber cable assemblies provide reliable high performance interconnects of up to 12 fibers in a minimum footprint. The MT connectors utilize the precision molded NTT compatible ferrule that connects 4 to 12 fibers using bare ribbon or ruggedized ribbon cable. Alignment between mating ferrules is accomplished using 2 precision guide pins that are pre-installed in a designated male connector. Two holes in the female connector locate the pins providing repeatable core to core alignment of the fibers. The MT ferrules are kept in the mated condition with the aid of a spring clip. The MTP assemblies utilize the same MT ferrules and package them in a push-pull keyed connector housing for quick and easy connection using the MTP adapter. Guide pins in the male connector maintain alignment with holes in the female connector while the adapter retains the connectors in the mated position. Back reflection for singlemode assemblies is controlled by using an 8 degree angle polishing process. Fanouts to single fiber leads connectorized with Molex industry standard SC, FC, and ST connectors are available to interconnect with the current installed base of transmitters, receivers and patch panels. An "enhanced" version of the multifiber connector has been developed to provide a quick and reliable connection for multiple optical fibers. The "enhanced" connector is a more precise NTT compatible ferrule, connecting the fibers using bare ribbon or ruggedized ribbon cable. The "enhanced" version will incorporate the same footprint and alignment as the standard MT/MTP. This "enhanced" connector will solve customers needs for a high density solution with minimal insertion loss. The "enhanced" MTP housing is yellow and the MT ferrule is keyed with a yellow line. *MTP is a registered trademark of US Conec Ltd. ST, STII are trademarks of Lucent Technologies Performance and Specifications Characteristics Insertion Loss: 9/125m SM fiber 62.5/125m MM fiber Enhanced 9/125m SM fiber Return Loss: Singlemode Temperature Range Durability Units Min. Avg. Max. Comments dB dB dB - .35 .3 .14 0.75 0.75 0.45 - dB C dB -40 - - < 60 +80 <0.2 Angle polish 40 cycles, 0.05 dB maximum change 1000 mate/unmate cycles MOLEX FIBER OPTICS DIVISION 5224 Katrine Avenue, Downers Grove, IL 60515 / Tel: 800-A1-FIBER or (630) 512-8787 Web: www.molex.com/fiber Fiber Optic MT and MTP* / MPO Cable Assemblies Mechanical Dimensions MT Connector 2X GUIDE PIN o.028 o.70 FERRULE BOOT OPEN POSITION SPRING CLIP 12X .0049 .125 .181 4.6 .276 7.0 .252 6.4 .138 3.5 11X CLOSED POSITION .0098 .250 .098 2.5 .118 3.0 .236 6.0 .315 8.0 .118 3.0 FIBER RIBBON MTP Connector MTP Connector, 8 Degree 8 .028 0.7 .065 1.65 1.78 45.2 .181 4.6 .50 12.7 .30 7.6 MTP Adapter .071 .094 2.40 +.008 -.000 +0.20 -0.00 .158 4.00 1.80 2x .087 2.21 2x .787.004 20.000.10 20.00+0.10 .591 15.00 +.020 -.004 +0.50 -0.10 .583 14.81 .787 20.00 .984 25.00 .394 10.00 +.020 -.004 +0.50 -0.10 .811 20.60 .386 9.80 RECOMMENDED MOUNTING P ATTERN All dimensions in INCHES mm Fiber Optic MT and MTP* / MPO Cable Assemblies Ordering Guide MX A AA - AA A - AA A - A NNN - A OOO - A NNN 1. Optical Fiber 2. Cable Construction 3. Connector Style End 1 4. Finish End 1 5. Connector Style End 2 6 Finish End 2 7. Unit of Measure Length (Dimension A) 6. Finish End 2 A - Multimode, ceramic ferrule, standard PC+ B - Multimode, ceramic ferrule, enhanced PC C - Singlemode, RL > 45 dB, super PC D - Singlemode, RL > 55 dB, ultra PC E - Singlemode, RL > 70 dB, APC F - Multimode, stainless steel M - Flat P - Angle (SM) Q - "Enhanced" angle (SM) Z - No connector (for End 2 only) 7. Unit of Measure* *Numeric values must be consistent C - Centimeters F - Feet I - Inches M - Meters 8. Breakout Style End 2 Breakout Length End 2 (Dimension C) 1. Optical Fiber A - Multimode, 50/125m B - Multimode, 62.5/125m D - Singlemode, 9/125m 2. Cable Construction RA - Bare ribbon fiber, 4 fibers RB - Bare ribbon fiber, 8 fibers RC - Bare ribbon fiber, 10 fibers RD - Bare ribbon fiber, 12 fibers RE - Ribbon cable, OFNR, 4 fibers RF - Ribbon cable, OFNR, 8 fibers RG - Ribbon cable, OFNR, 10 fibers RH - Ribbon cable, OFNR, 12 fibers 3. Connector Style End 1 MM - MT compatible, male MF - MT compatible, female PM - MTP/MPO compatible, male PF - MTP/MPO compatible, female 4. M P Q Finish End 1 - Flat - Angle (singlemode) - "Enhanced" angle (singlemode) 5. Connector Style End 2 A A - ST compatible, polymer coupling nut AB - ST compatible, metal coupling nut AC - ST compatible, 90 boot, metal coupling nut BA - STII compatible DA - FDDI, black housing DB - ESCON compatible EA - FC EB - FC/APC, standard key EC - FC/APC, tight fit key FA - SC, standard FB - SC, black housing, black boot FC - SC, red housing, red boot FD - SC, black housing, 90 black boot FE - SC, red housing, 90 red boot FF - SC/APC, green housing, green boot FG - SC Duplex GA - BSC GB - BSC/APC GC - BSCII GD - BSCII/APC HC - LC connector MM - MT compatible, male MF - MT compatible, female PH - BMTP pin holder, male PM - MTP/MPO compatible, male PF - MTP/MPO compatible, female ZZ - No connector (for End 2 only) Conversion Chart From to Multiply by meter inch 39.37 meter foot 3.281 centimeter inch .394 meter centimeter 100 ST and STII are registered trademarks of Lucent Technologies ESCON is a registered trademark of International Business Machines Corporation 8. Breakout Style End 2 A - No breakout R - Ribbon to 900m Example 1 Customer desires a 62.5/125m 12 fiber ribbon cable type OFNR jumper terminated with a male MTP connector and 12 SC connectors. The overall length is 20 meters with a break out length of 0.5 meters using 900m jacketed fanout. Ordering Format: MXBRH-PMM-FAB-M020-A000-R0.5 Example 2 Customer desires a 62.5/125m 8 fiber bare ribbon jumper terminated with a male MT and a female MT connector. The length is 3 feet. Ordering Format: MXBRB-MMM-MFM-F003-A000-A000 Fiber Optic MT and MTP* / MPO Cable Assemblies Assembly Construction & Breakout Detail MT to MT A A MT to Simplex Fanout A MTP to MTP A A MTP to Simplex Fanout A Standard Part Numbers Order Number 86181-0000 86180-3001 86180-3201 86780-0010 Description MTP adapter MT spring clip (8 fibers or less) MT spring clip (greater than 8 fibers) MT spring fastener tool 86001-0095 Rev. 3 USA/30MFO/2000.09 (c)2000, Molex Molex reserves the right to make any changes to the product(s) or information contained herein without notice. No liability is assumed as a result of their use or application. |
Price & Availability of 86180-3001
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |